MAKE SURE YOUR RIFLE IS UNLOADED BEFORE STARTING

Click on drawing to enlarge.

STEP #2 Place the mounting column over the front sling swivel stud. Align the thru holes; then install and center the retaining pin. Tighten the Allen Screw. Install new 1/2” threaded sling swivel stud and tighten.
 

STEP #3 Remove backing from Neoprene Pad. Align and affix to bipod mounting bracket.
 

STEP #4 Align and install Bipod over the mounting column with legs parallel to the barrel and pointing toward muzzle. (Depress “Snap-N-Lock” button and rotate legs 180°)
 

STEP #5 Place nylon washer over mounting column. Install mounting nut onto column and hand tighten plus 1/4 turn maximum. Failure to follow this procedure could result in damage to stock. Do Not Overtighten!
 

STEP #6 Your Advanced Technology, Inc. Bipod is now in place and ready to use.
 

STEP #7 To adjust legs forward, down, or rearward simply depress the “Snap-n-Lock” button and rotate leg to the desired location. Then release the button.
 

STEP #8 To adjust height (inner leg) twist knurled thumbscrew 1/4 turn and legs will freely drop. Retighten thumbscrew. To retract legs simply invert rifle and repeat process.