MAKE SURE YOUR RIFLE IS UNLOADED BEFORE STARTING

Step #2 Adjust legs into the “Down Position”. Depress the “snap-n-lock” button and rotate leg 90°, then release button.
 

Step #3 Place the open end of the clamp onto the rear of the bayonet lug.
 

Step #4 Orient the locking block over the front of the bayonet lug. Use the supplied #10x1” phillips screw to secure the locking block. Do Not Overtighten!
 

Step #5 Your Advanced Technology, Inc. Bipod is now in place and ready to use.
 

Step #6 To adjust legs down, or rearward simply depress the “Snap-n-Lock” button and rotate leg to the desired location. Then release the button.
 

Step #7 To adjust height (inner leg) twist knurled thumbscrew 1/4 turn and legs will freely drop. Retighten thumbscrew. To retract legs simply invert rifle and repeat process.