77-22 and M98 Parts

Ruger Firearm Exploded Views

Aluma-Lite Ruger 77-22 Target/Varmint Barrel

From Majestic Arms, LTD. and developed by Custom Gunsmith, Dino Longueira, Aluma-Lite barrels are a unique combination of 6061 aircraft grade aluminum and high quality carbon steel. The heart of an Aluma-Lite barrel is the button-rifled steel insert, which is manufactured by Lothar Walther for Majestic Arms. The steel insert is permanently bonded to the aluminum outer shell, then precision machined to produce an extremely accurate, lightweight, yet affordable barrel. Test targets shot at 50 yards with target ammo produced groups in the 1/2 inch range.

Weight: 24 oz.
Length: 17 inches;
Rifling: 6 groove, 1 in 16
11 degree Target Crown
 .920 outside diameter
Bead Blast Finish.

10/22 Long Rifle
10/22 Magnum

Mauser M98 Mojo Rear Peep Sight

Fully screw-adjustable for windage and elevation. Double recessed .187 aperture. Integrally machined mounting lugs.


Hogue M98 OverMolded Stock
Drop in fit for “sporterized” M98 large ring Mauser and Czech-made Mauser VZ 24. Will expressly drop-in fit virtually all M98 trigger mechanisms factory or aftermarket with no modifications.

Barrel channel will free float most #2-#3 taper barrels. Stock channel measures 1.180" at receiver and .820" at tip of fore-end. Rubber lined barrel channel can be easily enlarged for larger barrels or to fit military stepped barrels.

Stock relieved for bent down or bent down and swept back bolt handles. Straight military bolt handles will also function in stock.

Designed with hidden cutout for sliding style side safety. Gap will not show on rifles with common wing style bolt safety but can be easily modified to accommodate side safeties.

Floor-plate cutout for shorter FN floor-plates without lock screw on front tang. Rubber can be easily cut with rotary burr to accommodate longer style front tangs. Floor-plate inlet relieved for push-button style hinging box magazine door.

Pillar Bedded  $139.95
Full Length Bed Block $269.95
Ruger 77-22 Extended Mag Release

Ruger 77-22 Titanium Extended Magazine Release
Extends a full ¾" below the bottom of your receiver. Quickly release Magazines with a one flip of the thumb.


Mauser 98 Custom Trigger

Grand Master ® Mauser 98 Custom Single Stage Trigger
Adjustable for pull, sear engagement and overtravel with positive locks on all adjustment screws. Front of trigger is contoured round and smooth. Requires safety on shroud. Adjustable from 2 ½ to 5 lbs pull. Finish is blued steel. Supplied with new heat treated trigger/receiver cross pin, allen wrench and detailed instructions.


Copyright © 1999-2006 Power Custom, Inc. All rights reserved.
Website updated and maintained by Randall W. Power.
Please contact the webmaster if you encounter any problems with the site.